To use GPRS you must configure your phone to connect to the GPRS network. The network connection uses what is referred to as an access point or APN (Access Point Name). ACN has made it simple and easy for you to receive APN details at the cost of just one SMS message. All you have to do is follow the instructions below.
Step 1
Check whether your phone supports MMS and GPRS. Refer to your phone manufacturer’s user guide for details.
Step 2
you can order new settings directly from your mobile phone by sending an SMS with the following content:
"SERVICE PHONE MODEL" to 1999
"Service" should be WAP (or MMS). "Phone model" is the type on your mobile, such as "K700". Example: To setup MMS to a Sony Ericsson K700, send an SMS with the following text to 1999: "MMS K700". You will now receive an SMS in return. If you agree to save this message you are ready to send and receive MMS.
Manual Settings
You can also enter the required settings manually. Simply enter the details below for each setting in conjunction with the information provided in your phone’s user guide. Please be aware that different manufacturers use different names for the settings but the information detailed below should enable you to set-up your phone.
Manual GPRS Settings
To set-up your phone for GPRS, simply enter the following:
|
Connection Name
|
wap.ventelo.no
|
|
IP-address
|
10.10.10.10
|
|
Homepage
|
http://wap.ventelo.no
|
|
Access Point Name
|
wap.ventelo.no
|
|
Username
|
ventelo
|
|
Password
|
1111
|
|
Session Mode
|
Continuous
|
| Proxy Port |
9201 or 8080. This depends on what your mobile phone supports. See the user manual for your mobile phone for more details. |
NO
